TNK800 / 940-CNC series are parallel CNC lathes of popular edition. They are suitable for turning of complicated shaft, sleeve, and disk type work-pieces such as turning of internal and external cylindrical, conical, arc surfaces and various threads. And they are especially fit for turning of diversified work-pieces on small and medium batches. They are of high versatility, high efficiency, low inferiority and good conformability, Also, being excellent medium type machining equipment, they are of simple programming, easy operation and with full functions.
- The spindle can accomplish 4-stage infinite frequency variable speed changing. Being of wide range, big lap, full automatic, and the spindle speed can accommodate wide machining range.
- The spindle can accomplish large torque output at low speed range.
- The movable safe-guard design makes the machines easy to operate and easy to load/unload work-pieces.
- Equipped with load reducing device makes the tailstock easy to move.
- Taper turning unlimited angle and length.
- Cutting of various cylindrical and taper threads, and continuous transition threads.
SPECIFICATIONS
1. Main Specifications: TNK800-CNC / TNK940-CNC
Max. swing over bed Φ800mm
Max. swing over carriage Φ510
Distance between centers 3000mm
Max. length of work-piece 2850mm
Spindle through-hole Φ100mm
Width of the bed 550mm
Max. loading weigh of workpiece 2000kgs
2．Spindle：
Taper of spindle hole 120 for metric
Taper of spindle center Morse No.5
Model of Spindle nose No. C11(1：4；φ196.869mm)
Spindle speed range (four ranges stepless change) 12.5--800r/min
3．Turret：
Size of turret 250mm×250mm
Size of cutter cross section 32mm×32mm
Max. X axis travel 490mm
Position number of turret 4
Max. allowable cutting force P z 1470
Max. allowable force for longitudinal feed P x 5880N
Max. allowable force for cross feed P y 4078N
4．Tailstock:
Quill diameter 100mm
Quill stroke 250mm
Taper of quill front-end hole Morse No.5
5. Hydraulic and lubrication system
Device of automatic lubrication AMO-Ⅱ-150S/3Ⅱ
Model of gear pump CB-B6
Rated pressure of gear pump 2.54MPa (25kgf/cm2)
Flow rate of gear pump 6 L/min
Model of gear pump motor AO2-7124-B5
Working pressure of oil cylinder 0.98-1.176MPa (10-12kgf/cm2)
6．Cooling system:
Model of cooling pump AOB-25
Power of cooling motor 90W
Flow of cooling pump 25L/min
7．Driving system:
Model of main motor (frequency conversion) YP160M-4-B3
Main motor power 11KW
Rotational speed of motor 1460r/min
Model of V-belt B2190
Number of V-belt 4 pieces
8．Machine attachments：
3-jaw chuck 325mm (manual operation)
Operating and repairing tools 1 set
9．Machine overall size and weight:
|
80 series |
3000 |
|
length |
5177 |
|
width |
2000 |
|
height |
1830 |
|
Net weight(t) |
5.2 |
3 Standard accessories:
1 .Fanuc 0i mate TD
2. Coolant system
3. Standard wok light
4. Vertical 4-position electrical turret
5. Standard lathe colure
6. Manual tailstock
7. MANUAL 3-JAW CHUCK 325MM 1 PC
8. MANUAL TOOL 1 SET
9. DOCUMENTS
10. Half Chip guard
11. Automatic lubrication system
12. Heat exchanger
4 Special accessories (Optional)
- Other CNC system such as siemens 802D 802Ce Fagor 8035T
- Other size 3-jaw chuck
- 4-jaw chuck
- hydraulic 3-jaw chuck
- electrical 3-jaw chuck
- Food switch for electrical(hydraulic) 3-jaw chuck
- vertical 4-position electrical turret(240*240) vertical 6-position electrical turret
- horizontal 6-position electrical turret
- horizontal 8-position electrical turret
- manual hydraulic tailstock
- steady rest Φ20-Φ170
- bid steady rest Φ160-Φ350
- follower rest Φ20-Φ60
- live center M5
- higher than the standard precision
5. Manufacturers of the main equipments
1. CNC system FANUC 0i-mate TD Japan
2. Servo motor(X, Z axis) Japan FANUC
3 Chuck China
4. 4-position electrical turret China
5. Ball screw China
6. Spindle bearing China
6. Precision of the machine
(1) X axis position 0.03mm, Repeat position 0.012mm
(2) Z axis position (3000mm) 0.06mm, Repeat position 0.025mm